Chrysler 300 2012 - Specifications Manual

1 / CHRYSLER 300 SPECIFICATIONS http://media.chrysler.com
300 / SPECIFICATIONS
2012 Chrysler 300
SPECIFICATIONS
Dimensions are in inches (millimeters) unless otherwise noted.
GENERAL INFORMATION
Body Style
E-segment sedan
Assembly Plant
Brampton Assembly Plant, Ontario, Canada
EPA Vehicle Class
Large car
Introduction Date
2011 model
ENGINE: 3.6-LITER PENTASTAR DOHC 24-VALVE V-6
Availability
Standard — 300, 300 Limited and 300S (V-6) (RWD/AWD)
Type and Description
60-degree V-type, liquid-cooled
Displacement
220 cu. in. (3604 cu. cm)
Bore x Stroke
3.78 x 3.27 in. (96.0 x 83.0 mm)
Valve System
Chain-driven DOHC, 24 valves, hydraulic end-pivot roller rockers
Fuel Injection
Sequential, multi-port, electronic, returnless
Construction
Aluminum deep-skirt block with aluminum-alloy heads
Compression Ratio
10.2:1
Power (SAE net)
292 bhp (218 kW) @ 6,350 rpm (81.1 bhp/L)
Torque (SAE net)
260 lb.-ft. (353 N•m) @ 4,800 rpm
Max. Engine Speed
6,400 rpm (electronically limited)
Fuel Requirement
Unleaded regular, 87 octane (R+M)/2; and E-85 (Federal Bin 5,
37 state compliant)
Oil Capacity
6 qt. (5.7L) with dry filter
Coolant Capacity
14.0 qt. (13.25L)
Emission Controls
Dual three-way catalytic converters, heated oxygen sensors and
internal engine features
(a)
Max. Gross Trailer Weight (unbraked trailer)
1,000 lbs. (454 kg)
EPA Fuel Economy mpg (City/Hwy)
18/27 (RWD with WA580 5-speed automatic transmission)
19/31 (RWD with ZF 8HP45 eight-speed automatic transmission)
18/27 (AWD with ZF 8HP45 eight-speed automatic transmission)
Engine Assembly Plant
Trenton South Engine Plant, Trenton, Mich.
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.