To Next PageTo Next Page
Need help?Do you have a question about the Chrysler 300C SRT8 2006 and is the answer not in the manual?
General| Brand | Chrysler |
|---|---|
| Model | 300C SRT8 2006 |
| Category | Automobile |
| Language | English |
Specifies the body type of the vehicle, such as sedan.
Indicates the location where the vehicle was manufactured.
Classifies the vehicle according to EPA standards.
Notes the release date of the vehicle model year.
Indicates if the engine is standard or optional.
Details the engine configuration, cooling, and valve system.
Specifies the engine's cubic inch and cubic centimeter volume.
Provides dimensions for cylinder bore and piston stroke.
Describes the valve train components and operation.
Details the fuel delivery system type.
Outlines the engine block and head materials and design.
States the engine's compression ratio.
Lists the estimated horsepower and kilowatt output.
Lists the estimated torque in lb.-ft. and Nm.
Specifies the electronically limited maximum engine RPM.
Recommends the minimum octane rating for fuel.
Indicates the amount of engine oil required.
Specifies the type of oil used from the factory.
States the vehicle's coolant system capacity.
Details the emission control systems, like catalytic converters.
Indicates the maximum weight for towing a trailer.
Provides the estimated miles per gallon for city and highway driving.
Indicates if the transmission is standard or optional.
Details transmission features like control and clutch type.
Lists the gear ratios for each forward gear and reverse.
Specifies the ratio between driveshaft and wheel rotation.
Indicates the effective ratio in the highest gear.
Details the alternator's amperage rating.
Provides battery type, CCA rating, and maintenance status.
The distance between the front and rear axles.
Width of the wheels at the front and rear axles.
Includes length, width, and height of the vehicle.
The minimum distance from the ground to the vehicle's underbody.
The cross-sectional area of the vehicle facing forward.
Measures aerodynamic resistance.
The total weight of the vehicle without passengers or cargo.
Ratio of weight on front vs. rear axles.
Specifies the volume of the fuel tank.
Indicates the number of passengers the vehicle can seat.
Head, leg, shoulder, and hip room for front passengers.
Range of adjustment for front seats.
Adjustable recline angles for front seats.
Passenger volume for the front seating area.
Head, leg, shoulder, and hip room for rear passengers.
Passenger volume for the rear seating area.
Combined passenger volume for front and rear.
Volume of the vehicle's cargo space.
Index representing total interior passenger and cargo volume.
Height from the ground to the trunk's loading edge.
Describes the vehicle's engine placement and drive type.
Details the type of body construction used.
Highlights SRT-specific tuning for front and rear suspension.
Details the front suspension design and components.
Details the rear suspension design and components.
Specifies the steering mechanism used.
Ratio of steering wheel input to wheel movement.
The minimum space needed for a U-turn.
Number of turns from lock to lock.
Specifies standard tire size, type, manufacturer, and model.
Specifies optional tire size, type, manufacturer, and model.
Details wheel material and size.
Details front rotor size, caliper type, and swept area.
Details rear rotor size, caliper type, and swept area.
Lists Anti-lock, Traction Control, and Stability Control.
Specifies the type of brake power assist system.
