CD Operation
INSERTING AND EJECTING CDs
Inserting a CD
Insert the disc into the CD slot with the printed side
facing up. The unit pulls in the CD and starts playing
the first track. A CD can be loaded even when the unit
is turned off.
If a nonmusic CD is loaded into the CD player,
a CD ROM message appears briefly in the display, and
then the previous audiO mode resumes. The nonmusic
CD remains in the player until the eject button is
pressed. The CD player is not harmed by this.
Ejecting a CD
Press and hold the 0button to eject a CD. The unit
partially rejects the CD and waits for the CD to be man-
ually removed. The previous audio mode resumes.
The CD player pulls the CD back into the player if the
partially ejected CD is not manually removed within 20
seconds. The unit continues in its previous audio
mode. The eject button is recognized both when the
unit is on and off.
40
SWITCHING BETWEEN SINGLE CD AND
OPTIONAL CD CHANGER
Press the CD hard key to switch between single CD and
CD changer play. The CD hard key is ignored if no CD is
present in the player being switched to (i.e., single CD
or CD changer). The
t=l icon appears in the display
when single CD is the active audio source. The CDC
icon appears in the display when the CD changer is the
active audio source.
PLAYING AN AUDIO CD
A CD begins playing as soon as a CD is loaded into the
single CD player. While listening to AM or FM radio,
press the CD hard key when a CD is present to begin
playing a CD.
The
CD icon appears in the display while CD is the
active audio source.
The Clk/Ptm multifunction key determines whether the
track elapsed play time or time-of-day is displayed.
To Next Page
Loading...
