EasyManuals Logo

Chrysler Crossfire User Manual

Chrysler Crossfire
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
The doors can be unlocked by pulling on the inside door
handle, pressing and releasing the top portion of the
central locking switch located in the console, or by
pressing and releasing the UNLOCK transmit button on
the key Fob. Both doors can also be unlocked by turning
the key counterclockwise in the driver’s door.
NOTE: If the key in the ignition switch is in the
ON/RUN position, the vehicle cannot be locked or
unlocked with the remote control.
When you lock the vehicle, both door lock buttons
should move down. If either one stays up, the respective
door is not properly closed. You should then unlock the
vehicle, open and close the door, and lock the vehicle
again.
Each individual door can be locked with the respective
door lock button - the driver’s door can only be locked
when it is closed. If the vehicle has previously been
locked from the outside, only the door being opened
from the inside will unlock, and the alarm will come on.
The other door, the rear liftgate/decklid, fuel filler door,
and center console (roadster only) will remain locked.
NOTE: In case of a malfunction in the central locking
system, the doors can be locked and unlocked individu-
ally. To lock, turn the key in the driver’s door lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13
2

Table of Contents

Other manuals for Chrysler Crossfire

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chrysler Crossfire and is the answer not in the manual?

Chrysler Crossfire Specifications

General IconGeneral
BrandChrysler
ModelCrossfire
CategoryAutomobile
LanguageEnglish

Related product manuals