To Next Page

To Previous Page

Basic Setting - Heater

Select a temperature for each side of the pas-

senger compartment. Select air volume with

the fan control switch and set the fan control at

least to position 2 to prevent windows from

fogging up. Set the air distribution control switch to the

tri-level setting. Turn the defroster outlets for the side

windows to the detent positions. Open center air outlets

as desired.

Select a temperature for each side of the pas-

senger compartment. Select air volume with

the fan control switch. Then select the panel

setting on the air distribution control switch to

force air from the panel outlets.

Select a temperature for each side of the pas-

senger compartment. Select air volume with

the fan control switch. Then select the Bi-Level

setting on the air distribution control switch to

force air from both the upper panel outlets and the floor

outlets.

Basic Setting - Air Conditioner

Press the air conditioning ON/OFF switch. The

light in the switch will illuminate. Select a

temperature for each side of the passenger

compartment. Select the air volume with the

fan control switch, at least to position 1. Set the air

distribution control switch to one of the positions shown

above. Open center air outlets. Open left and right side

air outlets.

UNDERSTANDING YOUR INSTRUMENT PANEL 157

Chrysler Crossfire User Manual

Other manuals for Chrysler Crossfire