EasyManuals Logo

Chrysler Crossfire User Manual

Chrysler Crossfire
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #329 background imageLoading...
Page #329 background image
At Each Stop for Fuel
Check the engine oil level about five minutes after a
fully warmed engine is shut off. Checking the oil level
while the vehicle is on level ground will improve the
accuracy of the oil level reading. See the procedure
described in Checking Your Engine Oil in the Under-
standing Your Instrument Panel section or under En-
gine Oil in the Maintaining Your Vehicle section. Add
oil only when the level is at or below the ADD or MIN
mark.
Check the windshield washer solvent and add if
required.
Inspect wiper blade condition.
Check operation of lighting systems.
Inspect tires for unusual wear, damage, and pressure
(at least every 14 days).
Mechanical assemblies (e.g., engine, transmission, etc.)
- check for leaks.
Once a Month
Inspect the battery and clean and tighten the terminals
as required.
Check the fluid levels of coolant reservoir, brake
master cylinder and power steering and add as
needed.
Check all lights and all other electrical items for correct
operation.
Additional Periodic Maintenance
The following maintenance items should be performed
during the scheduled maintenance nearest the time
elapsed and/or distance shown. Follow the interval that
occurs first.
MAINTENANCE SCHEDULES 327
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S

Table of Contents

Other manuals for Chrysler Crossfire

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chrysler Crossfire and is the answer not in the manual?

Chrysler Crossfire Specifications

General IconGeneral
BrandChrysler
ModelCrossfire
CategoryAutomobile
LanguageEnglish

Related product manuals