2. At about 6 to 12 inches (15 to 30 cm) above the latch
plate, grasp and twist the belt webbing 180° to create a
fold that begins immediately above the latch plate.
3. Slide the latch plate upward over the folded webbing.
The folded webbing must enter the slot at the top of the
latch plate.
4. Continue to slide the latch plate up until it clears the
folded webbing.
Grasp and Twist Slide the latch plate upward over the folded webbing
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
