Need help?Do you have a question about the Chuango RC-80 and is the answer not in the manual?
The RC-80 remote is portable and can be used to arm, disarm, or activate the SOS alarm.
Connects the remote to the control panel wirelessly via a specific procedure, confirmed by control panel beeps.
Press button to arm the system, indicated by a single beep from the control panel.
Press button to disarm the system, indicated by two beeps, excluding 24-hour zones.
Press button to disarm home sensors, allowing free movement within the home zone.
Press the SOS button to immediately trigger the alarm state.
Arm the system silently by pressing Stay, waiting for indicator flash, then pressing Arm within 3 seconds.
Disarm the system silently by pressing Stay, waiting for indicator flash, then pressing Disarm within 3 seconds.
Details power supply, transmit current, distance, radio frequency, housing, ERP, operating conditions, and dimensions.
General| Interface | - |
|---|---|
| Input type | Press buttons |
| Product color | Black |
| Housing material | ABS synthetics |
| Remote control proper use | Security system |
| Built-in display | No |
| Maximum range | 80 m |
| Frequency band | 0.433 GHz |
| Battery type | CR2025 |
| Battery voltage | 3 V |
| Battery technology | Lithium |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
Weight and Dimensions| Width | 31 mm |
|---|---|
| Height | 9.5 mm |
| Length | 58 mm |
| Weight | - g |
To Next Page