INSTALLATION OF THE AIR SHIELD CASE:
(OMJ - 2 option)
We recommend the installation of an air shield case whenever your operation will be
held under unstable weighing conditions.
.. ·Remove the Weighing Pan and the Pan Support from
the balance .
...Loosen the 4 screws on top of the Balance Case .
.. ·Remove the Dust Ring from the Top Case .
.. ·Install the Air Shield Case by placing it squarely on the
top of the balance .
.. ·Insert the Air Shield Under Panel squarely inside the Air
Shield .
.. ·Replace the Dust Ring on top of the Air Shield Under
Panel .
.. ·Replace only the 2 outside screws and tighten them
snugly into place .
.. ·Replace the Weighing Pan and the Pan Support.
-22-
To Next Page
Loading...