1.Ensure all wirings are correct. (please refer to page 26,27)
2.If the lizard robot does not work, please check if batteries are placed in correct
polarity. (please refer to page 21) Also make sure the connector of battery
compartment plug to PC board no problem. (please refer to page 27)
3.Do not play the Lizard robot under direct sunlight or halogen lamp, it may cause
the robot to go wrong direction.
Trouble Shooting
4.If the lizard robot goes unsmoothly:
4-1. Pls check if front wheels are stuck by objects/or dust.
4-2. Back to page 28 , and check if the ball-joints (A11/A1/A8/A2)
of the front /rear legs (on steps 27~30) are stuck by objects/or dust.
4-3. Back to page 15, make sure C4/C22 (on step 2) are installed tightly.
4-4. Back to page 18, make sure C3/C21 (on step 8) are installed tightly.
36
To Next Page
Loading...
