SPECIFICATION PARAMETER
NOTE:
1. The lock is only subjected to simple waterproong, and must not be exposed to
rain, in order to avoid damage caused by water intrusion into lines.
2. The lock is not reproof, so it is not suitable for installation on the re doors with
waterproof requirements.
3. Do not use low-quality batteries, in order to avoid damage to the power supply
system as a result of leakage.
4.The anode and cathode of the battery must be installed correctly.
5. Do not scratch the surface of the touch screen with sharp hard objects.
6. Do not wipe the lock surface with corrosive liquid, so as not to damage the plat-
ing.
7. If you forget the administrator password, you can reset the lock to restore default
settings.
8. If the lock has been used for a long time, remove the lock and apply lubricant on
the rotating part of the handle, to ensure the rotational exibility of the handle.
To Next Page
Loading...