Need help?Do you have a question about the Cielsa Dawn E021 and is the answer not in the manual?
Verify door dimensions for proper lock fit, including cross-bore and backset.
Instructions and diagrams for drilling new holes using the provided template.
Steps to drill and prepare the door frame for the striker plate and box.
Procedure for adjusting and installing the deadbolt mechanism.
Steps to install the keypad unit onto the door.
Instructions for securing the rear panel of the lock.
Determine if the door is left-handed or right-handed for proper installation.
Final steps for installing the rear panel and connecting components.
Verify the key, keypad, and fingerprint functions after installation.
Procedure to reset the lock to its factory default settings.
Guide to setting up the primary administrator code for the lock.
Instructions for adding multiple general user codes or fingerprints.
Steps to modify the existing administrator code.
Procedure to alter existing general user codes or fingerprints.
How to remove a specific user code or fingerprint from the lock.
Procedure for deleting all user codes except the administrator.
Configure the automatic locking time delay for the door lock.
Enable or disable the mode where the lock remains unlocked.
Activate or deactivate quiet mode to silence operational sounds.
Set the lock to vacation mode, allowing only admin access.
General| Brand | Cielsa Dawn |
|---|---|
| Model | E021 |
| Category | Door locks |
| Language | English |
To Next Page