Cielsa Dawn E021 - Delete Single User Code

E. DELETE SINGLE USER’S CODE
(THE ID NUMBER IS SORTED ACCORDING TO THE ENTRY ORDER, THE ID NUMBER OF THE FIRST USER IS 001, THE ID NUMBER
OF THE SECOND USER IS 002, AND SO ON)
Press
” 3 “
Enter ID number
Press
“ ”
Enter
admin code
Press
“ ”
Enter admin ngerprint
eg, if your admin code is “555555“ or ngerprint and you want to change the old user n-
gerprint which ID is 002 into a new password”111111”.After the change,the ID of the new
password still is 002 ,the enter steps are as follows:
2
Enter admin ngerprint
2 555555
press old user ngerprint
press old user ngerprint
111111 111111
111111
111111
Enter admin ngerprint
2 555555 003
eg, if your admin code is “555555“ or ngerprint and you want to delete the user code which
ID is 003.After delete,the ID of the user code can’t unlock ,the enter steps are as follows:
2
003
About ID number:
• Admin code ID is 000.
• the rst registered user code ID is 001,the code is password or ngerprint.
eg,the rst registered user password is “666666“,001 is the ID of “666666“,the
second registered user ngerprint,002 is the ID of this ngerprint,…,the last ID is
199.
CHECK AND PREPARATION
INSTALLTION STEPS
INSTRUCTION OPERATION