Ⅱ
TEST
You have complet ed the installation.Before setting up, you can use the follow methods to
test whether the installation successfully or not.
2. The keypad function: Press the lock key for a long time to lock;The factory status code is
“123456 “, press “123456” and “ ” to unlock.
3. The ngerprint function: Any ngerprint in the factory status can be unlocked
1. The key function: Insert the key into the key hole directly to test.
press the key
press "123456"
NOTE:
the factory
status code is
“123456”
press the key
A
B
C
Any ngerprint unlcok,green ashes
CHECK AND PREPARATION
INSTALLTION STEPS
INSTRUCTION OPERATION
To Next Page
Loading...