Safety Notes
Working safely with the measuring tool is possible when the operating and
safety information are read completely and the instructions contained therein
are strictly followed. Never make warning l abels on the measuring tool
unrecognizable. Save these instructions for reference.
· Caution - Using unmentioned operating or adjusting equipment can lead to
dangerous radiation exposure.
· While the product is in operation, be c areful not to expose your eyes to the
emitting
laser beam. Exposure to the beam of a Class 2 l aser is considered
safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide
adequate protection.
· Do not stare directly into the beam or view directly with optical instruments
or set up the laser at eye l evel.
To Next Page
Loading...