36
FIRST TURN ON
At the first turn on, the ATU is in “manual mode” and you can digit the frequency
directly from the keyboard.
Now you can try to test the proper functioning of THE STEALTH LOOP:
place The STEALTH LOOP on a flat reflective surface
position The STEALTH LOOP leaving a space of at least 2
meters all around
connect the coax cable to the antenna
connect the motor cable and the coax cable to the ’ATU
ATTENTION: neither of the cables must be tangled or coiled. They should be
positioned perpendicular to the antenna, in such a way that they occupy the
position of minimum irradiation.
37
connect the ATU to the radio
To Next Page
