To Next PageTo Next Page
Need help?Do you have a question about the Ciro LIGHTED WINDSHIELD TRIM and is the answer not in the manual?
General| Color | Black |
|---|---|
| Material | Plastic |
| Lighting | LED |
| Installation | Plug-and-play |
| Power Source | 12V |
| Weather Resistance | Yes |
| Battery Quantity | Not applicable |
Apply dielectric grease to connectors and plug in the supplied y-harness inline with turn signals.
Plug the left end of the trim to the left signal and the right end to the right signal.
Reinstall outer fairing, connect any previously disconnected electrical plugs, and verify all lighting.
Install button head screws and washers to secure the windshield trim, then reinstall inner fairing fasteners.
