EasyManua.ls Logo

CIRRUS DESIGN SR20 - Oxygen System; Inflatable Restraint System; Flap Limitations; Paint

CIRRUS DESIGN SR20
508 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-20 P/N 11934-003
Section 2 Cirrus Design
Limitations SR20
Serials with EX5000C MFD installed: The Avidyne FlightMax
EX5000C Pilot’s Guide, P/N 600-00108-000, Revision 03 or later,
must be available to the pilot during all flight operations.
Oxygen System
Whenever the operating rules require the use of supplemental oxygen,
the pilot must:
• Use an oxygen system approved by Cirrus Design and listed in
the Oxygen System AFM Supplement Part Number 11934-
S09.
• Secure the oxygen bottle in the right front seat as described in
the AFM Supplement noted above.
Inflatable Restraint System
Serials 1268 thru 1540 after SB 2X-25-14 and serials 1541 and
subsequent; Use of a child safety seat with the inflatable restraint
system is prohibited.
Flap Limitations
Approved Takeoff Settings...........................................UP (0%) or 50%
Approved Landing Settings ............................. Up (0%), 50%, or 100%
Paint
To ensure that the temperature of the composite structure does not
exceed 150° F (66° C), the outer surface of the airplane must be
painted with an approved white paint, except for areas of registration
marks, placards, and minor trim. Refer to SR20 Airplane Maintenance
Manual (AMM), Chapter 51, for specific paint requirements.
Other Limitations
Smoking
Smoking is prohibited in this airplane.
Revision A6

Table of Contents

Other manuals for CIRRUS DESIGN SR20