CIS enLOGIC EA9502 - Rack Access Settings; Ehandle Settings

4.2 Rack Access Settings
For Rack Access Settings, please g
o to Smart Rack

Select Aisle Control. Two options can be selected which are Hot/Cold Combined and
 Hot/Cold Standalone– W
hen this is selected
aisle can control cold aisle.
Hot/Cold Combined – W
hen this is selected
control cold aisle.
 Select Autolock
Time and Door Open Time as 10 seconds. Max Door Open Time is set as 100 seconds.

Click Save to complete Rack Access Settings.
4.3 eHandle Settings
For eHandle Settings, please g
o to Smart Rack
 Select PDU
 Input ACU name such as
HOT AISLE.
 Select eHandle Work Mode.
Currently

Firmware version, hardware version and serial number are Read Only.
 Click Save to complete
eHandle
Lock not sensed after
xx
and door sensor is not sensed
o to Smart Rack
Access Control>Actions>
Rack Access Settings
Select Aisle Control. Two options can be selected which are Hot/Cold Combined and
hen this is selected
, aisle control is individual. Hot aisle
hen this is selected
, one
aisle can be controlled by opposite aisle.
Time and Door Open Time as 10 seconds. Max Door Open Time is set as 100 seconds.
Click Save to complete Rack Access Settings.
o to Smart Rack
Access Control>Actions>eHandle Settings
.
HOT AISLE.
Currently
RFID only mode can be selected.
Firmware version, hardware version and serial number are Read Only.
eHandle
Settings.
xx
seconds and door sensor is sensed, or Lock not sensed after
and door sensor is not sensed
. LED blinks YELLOW for Door Open Time(Sec)
.
17
Rack Access Settings
.
Select Aisle Control. Two options can be selected which are Hot/Cold Combined and
Hot/Cold Standalone.
can control hot aisle, cold
aisle can be controlled by opposite aisle.
Hot aisle can
Time and Door Open Time as 10 seconds. Max Door Open Time is set as 100 seconds.
.
seconds and door sensor is sensed, or Lock not sensed after
yy seconds
.