• To install or remove modules
• To remove the cover, if you are upgrading memory or other components
• Screws that fit your rack
• Wire crimper
• Wire for connecting the chassis to an earth ground:
• AWG 14 (2 mm²) or larger wire.
• For NEC-compliant grounding, an appropriate user-supplied ring terminal, with an inner diameter of 1/4
in. (5 to 7 mm)
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
22
Prepare for Router Installation
Required Tools and Equipment for Installation and Maintenance
To Next Page
Loading...
Need help?
General
