EasyManua.ls Logo

Cisco 1600 - Page 13

Cisco 1600
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before you begin
Install the management center as described in Connect Cables Turn On Power Verify Status for Versions
6.5 and Later, on page 9.
Be sure you have the following information needed for the management center to communicate on your
management network:
An IPv4 management IP address.
The management center interface is preconfigured to accept an IP4 address assigned by DHCP.
Consult with your system administrator to determine what IP address your DHCP has been configured
to assign to the management center MAC address. In scenarios where no DHCP is available, the
management center interface uses the IPv4 address 192.168.45.45.
A network mask and a default gateway (if not using DHCP).
If you are not using DHCP, configure a local computer with the following network settings:
IP address: 192.168.45.2
Netmask: 255.255.255.0
Default gateway: 192.168.45.1
Disable any other network connections on this computer.
Procedure
Step 1 Use a web browser to navigate to the management center's IP address: https://<Firepower Management
Center-IP>.
The login page appears.
Step 2 Log into the management center using admin as the username and Admin123 as the password for the admin
account. (The password is case-sensitive.)
Step 3 At the Change Password screen:
a) (Optional) Check the Show password check box to see the password while using this screen.
b) (Optional) Click the Generate Password button to have the system create a password for you that complies
with the listed criteria. (Generated passwords are nonmnemonic; take careful note of the password if you
choose this option.)
c) To set a password of your choosing, enter a new password in the New Password and Confirm Password
text boxes.
The password must comply with the criteria listed in the dialog.
The management center compares your password against a password cracking dictionary that
checks not only for many English dictionary words but also other character strings that could
be easily cracked with common password hacking techniques. For example, the initial
configuration script may reject passwords such as "abcdefg" or "passw0rd".
Note
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
13
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Perform Initial Setup at the Web Interface for Versions 6.5 and Later

Other manuals for Cisco 1600

Related product manuals