Installing a WAN Interface Card
Cisco 1600 Series Router Hardware Installation Guide
3-4
Caution Do not connect a WAN cable to the card until you have completed the
installation procedure.
Figure 3-2 Installing the WAN Interface Card in the Router (Cisco 1601 and BRI U Card Shown)
Step 5
Insert the card in the slot and gently push it in until the front panel of the card is
flush with the rear panel of the router.
Step 6 Tighten the card captive screws.
OK
WIC
OK
LNK
H7180
WAN interface card
Guides
Guides
To Next Page
Loading...
