EasyManua.ls Logo

Cisco 1801

Cisco 1801
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 12 of 16
Cisco 1800 Series Fixed-Configuration Routers
Noise Level
Normal operating temperature:
<80° F (27°C): 34 dBA
>80°F (27°C) through <104°F (40°C): 36 dBA
>104°F (40°C): 42 dBA
Regulatory Compliance
Safety
UL 60950
CAN/CSA C22.2 No. 60950
IEC 60950-1
EN 60950-1
AS/NZS 60950
EMC Immunity
EN300386
EN55024(CISPR24)
EN61000-4-2
EN61000-4-3
EN41000-4-4
EN41000-4-5
EN41000-4-6
EN41000-4-8
EN41000-4-11
EN50082-1
EN61000-6-2
ITU-T K.21
EMC Emissions
CFR 47 Part 15, Class A
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 300386
EN61000-3-2
EN61000-3-3
TELECOM
Telecom compliance standards depend upon country and interface type. Interfaces comply with FCC Part 68, CS-03,
JATE Technical Conditions, European Directive 99/5/EC, and relevant Technical Basis for Regulation (TBRs). For
specific information, refer to the data sheet for the specific interface card.
Homologation requirements vary by country and interface type. For specific country information, refer to the online
approvals data base:
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARCH&modu
le=EXTERNAL_SEARCH
Cisco 1801, 1802, 1803 and 1812 ISDN BRI S/T:
TIA-968-A
IC CS-03 Part VI
JATE Technical Requirements
TBR3
S031

Other manuals for Cisco 1801

Related product manuals