EasyManua.ls Logo

Cisco ASR 1002 - User Manual

Cisco ASR 1002
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cisco Aggregation Services Router (ASR) 1000 Series
Common Criteria Operational User Guidance
And Preparative Procedures
Version 0.4
October 27, 2017

Table of Contents

Other manuals for Cisco ASR 1002

Questions and Answers

  • M
    Michael EvansJul 26, 2025
    What to do if my Cisco ASR 1002 fails to power on?
    • C
      cassandracabreraJul 26, 2025
      If your Cisco Network Router fails to power on, ensure that all power cords are correctly connected both to the router and at the power connection end. Also, verify that the power switch is in the ON position.
  • C
    catherine46Aug 9, 2025
    What to do if Cisco Network Router system fails to boot up properly?
    • D
      danielbenderAug 9, 2025
      If your Cisco Network Router has power but fails to boot up properly, check the STATUS LED on the ASR 1000 Series route processor. Make sure all connections are secure.

Summary

Secure Acceptance of the TOE

Secure Installation and Configuration

Initial Setup via Direct Console Connection

Steps for initial console setup and configuration.

Network Protocols and Cryptographic Settings

Configuring network protocols and cryptographic settings.

Network Protocols and Cryptographic Settings

Remote Administration Protocols

Configuring secure remote access protocols like SSH.

Logging Configuration

Enabling and configuring system logging for audit.

Base Firewall Rule set Configuration

Configuring basic packet filtering rules for network security.

Secure Management

Passwords

Implementing strong password policies and complexity.

Virtual Private Networks (VPN)

Overview of VPN configuration and capabilities.

Security Relevant Events

Cisco ASR 1002 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Supported network protocolsBGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports4
Security algorithmsSSH
VPN tunnels quantity8000
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory4096 MB
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)560 W
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Product colorGray
Rack capacity2U
Weight and Dimensions IconWeight and Dimensions
Depth461 mm
Width437.4 mm
Height89 mm
Weight- g

Related product manuals