What to do if my Cisco Network Router fails to power on?
If your Cisco Network Router fails to power on, ensure that all power cords are correctly connected both to the router and at the power connection end. Also, verify that the power switch is in the ON position.
What to do if Cisco Network Router system fails to boot up properly?
If your Cisco Network Router has power but fails to boot up properly, check the STATUS LED on the ASR 1000 Series route processor. Make sure all connections are secure.
General| Product Type | Router |
|---|---|
| Form Factor | Rack-mountable |
| Rack Height | 2U |
| Forwarding Capacity | Up to 20 Gbps |
| Total Number of Ports | Varies by configuration |
| Number of Total Expansion Slots | 4 |
| Product Series | ASR 1000 |
| Model | ASR 1004 |
| Forwarding Performance | Up to 20 Gbps |
| Operating System | Cisco IOS XE |
| Power Supply | Dual |
| Route Processor | ASR 1000 Series Route Processor |
| Network Interface Modules | SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet |
| Interfaces/Ports | Varies by configuration |
| Expansion Slot Type | SPA |
| Throughput | 20 Gbps |
| Redundancy | Power supply, Route Processor |
| Interfaces | Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+ |
| Storage | Up to 64 GB Flash |
Guides the initial configuration using a console connection.
Details steps for enabling FIPS compliance mode.
Covers setting up administrator accounts and credentials.
Configures account lockout after multiple failed login attempts.
Securing remote administration access using protocols like SSH.
Procedures for configuring system logging and audit trails.
Configuration of basic packet filtering rules for network security.
Guidelines for creating strong, complex passwords.
Configuration of user identification and authentication methods.
Introduces IPsec services and their security benefits.
Configuration and use of X.509 certificates for authentication.
Configuring firewall rules and VPNs for traffic control.
To Next Page