To Next PageTo Next Page
Need help?Do you have a question about the Cisco ASR 1001-HX and is the answer not in the manual?
General| Form Factor | 1 RU |
|---|---|
| Rack Mountable | Yes |
| Redundant Power Supply | Optional |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Memory | 16 GB |
| Power Supply | Internal AC or DC |
| Humidity | 5% to 95% non-condensing |
| Ports | Built-in 8 x 1GE and 4 x 10GE (SFP+) |
| Maximum NAT sessions | Up to 4 million |
Details the physical and functional components of the ASR 1001-HX and 1002-HX routers.
Provides essential safety guidelines to follow before starting router installation or replacement.
Lists general safety warnings and precautions related to electrical safety and installation.
Outlines specific power and electrical wiring requirements for reliable system operation.
Specifies the dedicated electrical circuit and wiring requirements for powering the Cisco ASR routers.
Provides guidelines and precautions for safely mounting the Cisco ASR routers in equipment racks.
Explains how to prevent ESD damage to electronic components during handling and installation.
Provides essential guidelines for installing the Cisco ASR routers into various types of equipment racks.
Procedures for mounting the Cisco ASR routers into two-post and four-post equipment racks.
Explains the process for establishing a proper chassis ground connection for safety and system integrity.
Step-by-step guide for powering on the Cisco ASR router for the first time.
Guides through the initial router configuration process using the setup command facility.
Provides procedures for removing and installing AC and DC power supplies in the routers.
