Cisco ASR 1000

Cisco ASR 1000 Series Router SPA Interface
Processors (SIPs)
This chapter describes the Cisco ASR 1000 Series Router SPA Interface Processors supported on the Cisco
ASR 1000 Series Routers.
This chapter contains the following sections:
For detailed documentation on Cisco ASR 1000 SIPs and SPAs, see:
•
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
•
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
Throughout this document, the term slot refers to the Cisco ASR 1000 Series Router chassis slot. The
Cisco ASR 1000 Series Route Processor, Cisco ASR 1000 Series Embedded Services Processor, and
Cisco ASR 1000 Series SPA Interface Processor (SIP), and power supplies plug into these slots. Shared
port adapters plug into SIP bays.
Note
•
Cisco ASR 1000 Series SPA Interface Processor, page 1
•
SPA Interface Processor Slot Numbering, page 4
Cisco ASR 1000 Series SPA Interface Processor
This section describes the Cisco SPA interface processors for the Cisco ASR 1006, Cisco ASR 1004, Cisco
ASR 1002, and Cisco ASR 1013 routers. The Cisco ASR 1000 Series Routers support the following Cisco
ASR 1000-SIPs:
• Cisco ASR 1000-SIP10—This SIP supports:
◦
4 half height (¼ Rate or full rate or combination) SPAs with up to 16 ports per SPA
◦
2 full height (¼ Rate or full rate or combination) SPAs with up to 32 ports per SPA
◦
2 half height and 1 full height comb in at on that does not exceed 64 ports
◦
Up to 10 Gbps of oversubscription
Cisco ASR 1000 Series Router Hardware Installation Guide
1

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)

Summary

Cisco ASR 1000 Series SPA Interface Processor

Cisco ASR 1000-SIP10 Features

Details the capabilities of the Cisco ASR 1000-SIP10, including SPA support and oversubscription.

Cisco ASR 1000-SIP40 Features

Details the capabilities of the Cisco ASR 1000-SIP40, including SPA support and bandwidth.

SIP and SPA Characteristics

Explains the nature of SIPs and SPAs, including their role, subslots, and online insertion/removal.

SPA Interface Processor Slot Numbering

Cisco ASR 1006 and ASR 1004 Router SPA Support

Describes the SPA configurations supported by Cisco ASR 1006 and ASR 1004 routers.

Cisco ASR 1002 Router SPA Configuration

Details the SPA configuration for the Cisco ASR 1002 Router, including bays and built-in SPAs.

Cisco ASR 1002-F Router SPA Configuration

Details the SPA configuration for the Cisco ASR 1002-F Router, including removable and built-in SPAs.

Cisco ASR 1013 Router SPA Support

Describes the SPA configurations supported by Cisco ASR 1013 routers.

Cisco ASR 1001 Router SPA Configuration

Details the SPA configuration for the Cisco ASR 1001 Router, including daughter card and SPA bays.

Cisco ASR 1002-X Router SPA Configuration

Details the SPA configuration for the Cisco ASR 1002-X Router, including removable and built-in SPAs.