To Next PageTo Next Page
Need help?Do you have a question about the Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router and is the answer not in the manual?
General| Model | ASR1000-RP1 |
|---|---|
| Product Series | ASR 1000 Series |
| Category | Network Router |
| Flash Memory | 4 GB |
| Throughput | Up to 5 Gbps |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Compatible With | ASR 1000 Series Routers |
| Processor | Dual-core |
| Memory | 4 GB |
| Redundancy | Yes |
| Interfaces | Gigabit Ethernet |
| Operating System | Cisco IOS XE |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 5 to 95% non-condensing |
Discusses the new software packaging model and architecture for Cisco ASR 1000 Series Routers.
Describes how to access the command-line interface using console connections.
Details managing software files using three distinct command sets.
Provides procedures for managing and configuring routers with consolidated and individual subpackages.
Illustrates upgrading individual subpackages, particularly SPA subpackage upgrades.
Explains In Service Software Upgrades for redundant platforms with minimal outage.
Details upgrade processes for non-redundant platforms that involve service impact.
Provides an overview of hardware redundancy features on Cisco ASR 1000 Series Routers.
Discusses software redundancy opportunities for the Cisco ASR 1000 Series Routers.
Explains Route Processor Redundancy (RPR) and its functionality.
Describes the Stateful Switchover (SSO) feature for synchronized state information.
Discusses PPP sessions and L2TP tunnels scaling, dependent on hardware combinations.
Provides configuration tasks for achieving high scalability on Cisco ASR 1000 Series Routers.
Provides an overview of Call Home features for critical system event notifications.
Details the tasks required to configure the Call Home feature.
Guides on configuring Call Home to securely communicate with the Smart Call Home service.
Describes the console port on the Cisco ASR 1000 Series Router.
Covers Telnet and SSH configuration and handling on Cisco ASR 1000 Series Routers.
Introduces persistent Telnet/SSH for clearer traffic treatment and remote access.
Details how to configure a transport map for console port access policies.
Provides steps to configure persistent Telnet connections on the router.
Provides steps to configure persistent SSH connections on the router.
Provides an overview of the Gigabit Ethernet Management interface.
Describes how to configure SyncE using different methods.
Provides steps to configure a bridge domain interface.
Explains how to monitor and maintain Frame Relay configurations.
Details enabling the legacy and graphics-Rbased web user interfaces.
Example of configuring the router to boot using extracted subpackages.
Example of enabling a second IOS process on a single RP using SSO.
Example of performing an ISSU upgrade to consolidated packages on dual RPs.
