Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

14-9
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 14 Configuring and Accessing the Web User Interface
Using Auto Refresh
For additional information on the commands and the options available with each command, see the Cisco
IOS Configuration Fundamentals Command Reference Guide located at:
http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html.
Using Auto Refresh
The web user interface does not refresh content automatically by default.
To set an auto-refresh interval, follow these steps:
Step 1 Check the Refresh every check box on the graphical web user interface home page. A check mark
appears in the check box (See
Figure 14-3).
Figure 14-3 Checking Auto Refresh Check Box
Step 2 Set the frequency of the auto-refresh interval using the drop-down menu.
Step 3 Click the Start button to the right of the drop-down menu. After hitting this button, the Start button
becomes the Stop button and a countdown timer placed to the right of the Stop button begins to
increment (See
Figure 14-4).
Figure 14-4 Auto Refresh Counter Example
The web user interface screen refreshes every time this counter reaches 0 seconds.
If you would like to stop the auto-refresh update, click the Stop button to return to the default setting of
no auto-refresh update.

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English