Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router - C H a P T E R 12 Monitoring and Maintaining Multilink Frame Relay; Monitoring and Maintaining Frame Relay and Multilink Frame Relay

12-2
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 12 Monitoring and Maintaining Multilink Frame Relay
Monitoring and Maintaining Frame Relay and Multilink Frame Relay
You can use the following debug commands to debug the multilink frame relay configurations:
• debug platform hardware qfp active interface frame-relay multilink—Debugs the multilink
frame relay interfaces in the Cisco QuantumFlow Processor (QFP).
• platform trace runtime process forwarding-manager module—Enables Forwarding Manager
Route Processor and Embedded Service Processor trace messages for the forwarding manager
process.
For additional information on the commands and the options available for each command, see the Cisco
IOS Configuration Fundamentals Command Reference document, located at:
http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html.