Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

7-37
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 7 Configuring Call Home
Alert Group Trigger Events and Commands
Alert Group Trigger Events and Commands
Call Home trigger events are grouped into alert groups, with each alert group assigned CLI commands
to execute when an event occurs. The CLI command output is included in the transmitted message.
Table 7-3 lists the trigger events included in each alert group, including the severity level of each event
and the executed CLI commands for the alert group.
Ta b l e 7-3 Call Home Alert Groups, Events, and Actions
Alert Group
Call Home
Trigger Event
Syslog Event Severity
Description and CLI Commands
Executed
Configuration — — — User-generated request for
configuration. (Sent to TAC.)
CLI commands executed:
show platform
show inventory
show running-config all
show startup-config
show version
Diagnostic — — — CLI commands executed:
show platform
show diagnostic result slot x detail
show version
show inventory
show buffers
show logging
show diagnostic result slot all
show diagnostic events slot all
— Error Counter
Monitoring Test
failure count
exceeds
threshold
%ASR1000_RP_DIAG_TEST-4-
ERR_CNTR_HM_TEST_FAIL
4 ERROR_COUNTER_WARNING:
Slot number Error counter exceeds
threshold, system operation
continue.
— Error Counter
Monitoring Test
failure count
exceeds
threshold
%ASR1000_RP_DIAG_TEST-4-
ERR_CNTR_HM_TEST_DATA
4 ERROR_COUNTER_DATA:
ID:number IN:number PO:number
RE:number RM:number
DV:number EG:number CF:number
TF:number
Environmental — — — Events related to power, fan, and
environment sensing elements, such
as temperature alarms. (Sent to
TAC.)
CLI commands executed:
show platform
show environment
show inventory
show logging

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English