Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router - Configuring a Bridge Domain Interface

11-5
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 11 Configuring Bridge Domain Interfaces
Bridge Domain Interface Scalability
Bridge Domain Interface Scalability
Table 11-1 lists the bridge domain interface Scalability Numbers, based on the type of ASR1000
Forwarding Processors.
Configuring a Bridge Domain Interface
To configure a bridge domain interface, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. interface BDI interface number
3. ip address ip-address mask
4. mac-address {mac-address}
5. no shut
6. shut
Ta b l e 11-1 Bridge Domain Interface Scalability Numbers Based on the Type of ASR1000
Forwarding Processors
Description
ASR1000-ESP5
ASR 1001
ASR 1002-F (ESP2.5)
ASR1000-ESP10
ASR1000-ESP10-N
ASR1000-ESP20 ASR1000-ESP40
Maximum bridge domain interfaces per
router
4096 4096 4096