Cisco ASR 1001-HX User Manual

Figure 28: Cisco ASR 1002-HX Router in a Four-Post Rack — Front and Rear Rack-Mounting
Front rack mount bracket ear and screws3Rear rack equipment rail1
Front rack equipment rail4Rear rack mount bracket ear and screws2
Step 7
Use a level to verify that the tops of the two brackets are level, or use a measuring tape to verify that both
brackets are the same distance from the top of the rack rails.
What to Do Next
This completes the procedure for installing the chassis in the rack. Proceed to the “Attaching a Chassis Ground
Connection" section to continue the installation.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
61
Installing the Router
Four-Post Rack Installation

Cisco ASR 1001-HX Specifications

General

Form Factor	1 RU
Rack Mountable	Yes
Redundant Power Supply	Optional
Operating Temperature	32 to 104°F (0 to 40°C)
Memory	16 GB
Power Supply	Internal AC or DC
Humidity	5% to 95% non-condensing
Ports	Built-in 8 x 1GE and 4 x 10GE (SFP+)
Maximum NAT sessions	Up to 4 million