Cisco ASR 1004 User Manual

Page 62 of 72
Requirement
Management Action to
Log
Sample Log
FTA_SSL.3: TSF-initiated
termination
Specifying the inactivity
time period.
Feb 15 2013 13:12:25.055: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco logged
command: exec-timeout 60
FTA_SSL.4: User-initiated
termination
Logging out of TOE.
Feb 15 2013 13:12:25.055: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco logged
command: exit
FTA_TAB.1: Default TOE
access banners
Configuring the banner
displayed prior to
authentication.
Feb 15 2013 13:12:25.055: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco logged
command: banner login d This is a banner d
FTP_ITC.1: Inter-TSF
trusted channel
None
N/A
FTP_TRP.1: Trusted path
Connecting to the TOE
with SSH.
Jan 17 05:05:49.460: %SEC_LOGIN-5-
LOGIN_SUCCESS: Login Success [user: ranger]
[Source: 21.0.0.3] [localport: 22] at 00:05:49 EST
Thu Jan 17 2013
5.1 Deleting Audit Records
The TOE provides the privileged Administrator the ability to delete audit records stored within
the TOE.
This is done with the clear logging command. See the [10] Cisco IOS Configuration
Fundamentals Command References.

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash