Cisco ASR 1004 Router Overview and Installation
This chapter describes the Cisco ASR 1004 Router and the procedures for installing the Cisco ASR 1004
Router on an equipment shelf or tabletop or in equipment racks. It also describes how to connect interface
and power cables.
This chapter contains the following sections:
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each warning
to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
Warning
Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information
for Cisco ASR 1000 Series Aggregation Services Routers publication. This document provides important
safety information you should know before working with the system. Statement 200
Warning
•
Cisco ASR 1004 Router Description, page 2
•
Installation Methods, page 6
•
General Rack Installation Guidelines, page 6
•
Guidelines for an Equipment Shelf or Tabletop Installation, page 7
•
Equipment Shelf or Tabletop Installation, page 8
•
Rack-Mounting the Cisco ASR 1004 Router, page 10
•
Attaching the Chassis Rack-Mount Brackets, page 12
•
Installing the Cisco ASR 1004 Router in a Rack, page 15
•
Attaching a Chassis Ground Connection, page 21
•
Attaching the Cable-Management Bracket, page 24
•
Connecting the Shared Port Adapter Cables, page 25
•
Connecting the Console and Auxiliary Port Cables, page 26
Cisco ASR 1000 Series Router Hardware Installation Guide
1
To Next Page
Need help?
General
