EasyManuals Logo

Cisco ASR 1004 User Manual

Cisco ASR 1004
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Page 63 of 72
6 Network Services and Protocols
The table below lists the network services/protocols available on the ASR as a client (initiated outbound) and/or server (listening for
inbound connections), all of which run as system-level processes. The table indicates whether each service or protocol is allowed to
be used in the certified configuration.
For more detail about each service, including whether the service is limited by firewall mode (routed or transparent), or by context
(single, multiple, system), refer to Command Reference guides listed in Table 2.
Table 9: Protocols and Services
Service or
Protocol
Description
Client
(initiating)
Allowed
Server
(terminating)
Allowed
Allowed use in the certified configuration
DHCP
Dynamic Host
Configuration
Protocol
Yes
Yes
Yes
Yes
No restrictions.
DNS
Domain Name
Service
Yes
Yes
No
n/a
No restrictions.
ESP
Encapsulating
Security Payload (part
of IPsec)
Yes
Yes
Yes
Yes
Configure ESP as described in the section
Error! Reference source not found.of this
document.
FTP
File Transfer Protocol
Yes
No
No
n/a
Use SCP or HTTPS instead.
ICMP
Internet Control
Message Protocol
Yes
Yes
Yes
Yes
No restrictions.
IKE
Internet Key
Exchange
Yes
Yes
Yes
Yes
As described in section Error! Reference
source not found. of this document.
IPsec
Internet Protocol
Security (suite of
protocols including
IKE, ESP and AH)
Yes
Yes
Yes
Yes
Only to be used for securing traffic that
originates from or terminates at the ASA, not
for “VPN Gateway” functionality to secure
traffic through the ASA. See IKE and ESP
for other usage restrictions.
Kerberos
A ticket-based
authentication
protocol
Yes
Over IPsec
No
n/a
If used for authentication of ASA
administrators, tunnel this authentication
protocol secure with IPsec.

Table of Contents

Other manuals for Cisco ASR 1004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1004 and is the answer not in the manual?

Cisco ASR 1004 Specifications

General IconGeneral
Product TypeRouter
Form FactorRack-mountable
Rack Height2U
Forwarding CapacityUp to 20 Gbps
Total Number of PortsVaries by configuration
Number of Total Expansion Slots4
Product SeriesASR 1000
ModelASR 1004
Forwarding PerformanceUp to 20 Gbps
Operating SystemCisco IOS XE
Power SupplyDual
Route ProcessorASR 1000 Series Route Processor
Network Interface ModulesSFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/PortsVaries by configuration
Expansion Slot TypeSPA
Throughput20 Gbps
RedundancyPower supply, Route Processor
InterfacesGigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
StorageUp to 64 GB Flash

Related product manuals