EasyManuals Logo

Cisco 1841 User Manual

Cisco 1841
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
OL-8719-01
Cisco 1841 and Cisco 2801 Routers
Note All RSA operations are prohibited by policy, and commands that can be executed by Officer are shown
“# command”.
Router
authentication
key 2
Shared
Secret
This key is used by the router to authenticate
itself to the peer. The key is identical to Router
authentication key 1 except that it is retrieved
from the local database (on the router itself).
Issuing the “no username password” zeroizes the
password (that is used as this key) from the local
database.
NVRAM
(plaintext)
“# no username password
SSH session
key
Various
symmetric
This is the SSH session key. It is zeroized when
the SSH session is terminated.
DRAM
(plaintext)
Automatically when SSH
session terminated
User password Shared
Secret
The password of the User role. This password is
zeroized by overwriting it with a new password.
NVRAM
(plaintext)
Overwrite with new
password
Enable
password
Shared
Secret
The plaintext password of the CO role. This
password is zeroized by overwriting it with a new
password.
NVRAM
(plaintext)
Overwrite with new
password
Enable secret Shared
Secret
The ciphertext password of the CO role.
However, the algorithm used to encrypt this
password is not FIPS approved. Therefore, this
password is considered plaintext for FIPS
purposes. This password is zeroized by
overwriting it with a new password.
NVRAM
(plaintext)
Overwrite with new
password
RADIUS secret Shared
Secret
The RADIUS shared secret. This shared secret is
zeroized by executing the “no radius-server key”
command.
NVRAM
(plaintext),
DRAM
(plaintext)
“# no radius-server key”
TACACS+
secret
Shared
Secret
The TACACS+ shared secret. This shared secret
is zeroized by executing the “no tacacs-server
key” command.
NVRAM
(plaintext),
DRAM
(plaintext)
“# no tacacs-server key”
Table 8 Cryptographic Keys and CSPs (Continued)

Other manuals for Cisco 1841

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1841 and is the answer not in the manual?

Cisco 1841 Specifications

General IconGeneral
Flash memory32 MB
Internal memory128 MB
Product colorBlack, Blue, Stainless steel
Rack capacity1U
LED indicatorsYes
Storage temperature (T-T)-25 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
Cabling technology10/100Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports2
Firewall securityCisco IOS
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES
Dual-bandNo
Weight and Dimensions IconWeight and Dimensions
Depth274 mm
Width343 mm
Height47.5 mm
Weight2800 g

Related product manuals