EasyManuals Logo

Cisco 1921 User Manual

Cisco 1921
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Modules Internal to the Cisco 1941 Router
11
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Software Requirement for ISMs
Cisco IOS software of a specified release or later release is required for using an ISM.
To determine the version of Cisco IOS software that is running on your router, log in to the router and
enter the show version command:
Router> show version
Cisco Internetwork Operating System Software
2900 Software (C2900-ADVENTERPRISEK9-M), Version 12.3(8.2)T, INTERIM SOFTWARE
ISM Location
See the “Locating Modules” section on page 7 for the location of the ISM.
Removing an ISM
Before you remove an ISM, remove the chassis cover as described in the “Opening and Closing the
Chassis” section on page 5.
To remove an ISM, perform the following procedure. To complete this procedure, you need a number 2
Phillips screwdriver or flat-blade screwdriver.
Step 1 Locate the ISM to be removed. See the “Locating Modules” section on page 7 for the location of the
ISM.
Step 2 Remove the four screws from the ISM as shown in Figure 7.
Figure 7 Removing Screws from the ISM
Step 3
Carefully lift the ISM from the connector and the standoff. Keep the ISM parallel with the system board
to prevent damage to the connector and standoff.
Step 4 Place the ISM in an antistatic bag to protect it from ESD damage.
1 ISM retention screws (4)
250947
1
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1921 and is the answer not in the manual?

Cisco 1921 Specifications

General IconGeneral
Product TypeRouter
WAN Ports2
Power SupplyAC 120/230 V (50/60 Hz)
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Memory256 MB DRAM
Flash Memory128 MB
Expansion Slots1 x ISM
USB Ports2 x USB
Dimensions4.4 x 33 x 24.9 cm
Network / Transport ProtocolIPSec
Remote Management ProtocolSNMP, Telnet, HTTP, HTTPS, SSH
FeaturesFirewall protection, VPN support
Compliant StandardsIEEE 802.1Q
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C
Humidity10 to 85% (non-condensing)
Weight3.5 kg
PerformanceUp to 25 Mbps throughput

Related product manuals