Cisco 2000 Series - Technical Specifications and Pinouts; Router System Specifications; Cable Pinout Tables

10
Reference
System Specifications
Following are the specifications for the router system.
Table 1 System Specifications
Cable Pinouts
The following tables list the pinouts for the cables that can be used with the router:
• Console asynchronous serial port, Table 2, on page 11
• Auxiliary asynchronous serial port, Table 3, on page 11
• EIA-530 synchronous serial DTE, Table 4, on page 12
• RS-232 synchronous serial DTE, Table 5, on page 14
• RS-449 synchronous serial DTE, Table 6, on page 15
• V.35 synchronous serial DTE, Table 7, on page 16
1. AUI = Attachment unit interface.
Description Design Specification
Dimensions H x W x D 13" x 14" x 4" (33 x 35.6 x 10 cm)
Weight 15 lb (6.8 kg)
Input voltage, frequency,
and power dissipation
110/220 VAC at 50 through 60 Hz
55W (max.)
273 Btu/hr
Processor Motorola 68EC030—20 MHz
Memory 1-MB primary memory
512-KB shared memory
32-KB nonvolatile configuration RAM
Network interface options 1 Ethernet and 1 synchronous serial (2102)
or 1 Token Ring and 1 synchronous serial (2202)
Ethernet interfaces AUI
1
IEEE 802.3 (DB-15)
Token Ring IEEE 802.5 (DB-9)
Synchronous serial interfaces RS-232, RS-449, V.35, X.21, EIA-530
Console port Asynchronous RS-232 DB-25 female connector
Auxiliary port Asynchronous RS-232 DB-25 male connector
Operating environment 32 to 104
°
F (0 to 40°C )
Nonoperating temperature –40 to 185°F (–40 to 85°C)
Operating humidity 5 to 95%, noncondensing
Noise level 40 dBa