Cisco IE 2000

Cisco Systems, Inc. www.cisco.com—CiscoSans
Cisco IE 2000 Switch Hardware Installation
Guide
First Published: June 2012
Last Updated: December 2015

Cisco IE 2000 Specifications

General

Uplink Ports	2 SFP ports
Mounting	DIN rail or wall mount
Management	CLI, Web, SNMP
MAC Address Table Size	8000
Category	Switch

Summary

Product Overview

Switch Models

Ports and Slots

Power Connectors

Explains the DC and PoE power connector types and their connections.

Management Options

Switch Installation

Preparing for Installation

Provides essential information and warnings before beginning the switch installation process.

Connecting to a Console Port

Guides on connecting to the switch via RJ-45 or USB console ports for configuration.

Connecting to Power

Instructions for connecting the switch to AC or DC power sources.

Installing the Switch on a DIN Rail

Describes the process of mounting the switch onto a DIN rail for installation.

Connecting Alarm Circuits

Connecting Destination Ports

Installing and Removing SFP Modules

Provides instructions for installing and removing SFP modules from the switch.

Troubleshooting

Diagnosing Problems

Explains how to use switch LEDs and statistics for troubleshooting issues.

Resetting the Switch

How to Recover Passwords

Cable and Connectors

Configuring the Switch with the CLI-Based Setup Program

Accessing the CLI Through the Console Port

Explains how to access the switch's command-line interface via console ports.

Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB Device Driver

Completing the Setup Program

Details the steps to complete the initial switch configuration via the setup program.