Cisco IE 3010

Cisco Systems, Inc. www.cisco.com—CiscoSans
Cisco IE 3010 Switch Hardware Installation
Guide
First Published: October, 2010
Last Updated: May 2015
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH-
OUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCU-
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Cisco IE-3010-24TC o
cerca il tuo prodotto tra le migliori offerte di Switch

Cisco IE 3010 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
Layer	Layer 2
VLANs	255
Mounting	DIN rail, Wall
MAC Address Table Size	8000
Input Voltage	24V DC, 48V DC
Standards Compliance	IEEE 802.3, IEEE 802.1Q, IEEE 802.1p
Model	Cisco IE 3010

Summary

Product Overview

Switch Models

Details the different switch models available, including their specifications.

Management Options

Switch Installation

Installation Warnings

Lists important safety warnings applicable to switch installation procedures.

Installing the Switch

Covers procedures for rack-mounting and wall-mounting the switch.

SFP Module Installation and Removal

Connecting Devices to Ethernet Ports

Power Supply Installation

Installation Guidelines

Grounding the Switch

Explains the procedures for properly grounding the switch.

Installing the Power-Supply Module

Step-by-step guide for installing a power supply module into the switch.

Wiring the Power Source

Instructions for connecting the switch to AC or DC power sources.

Removing the Power-Supply Module

Troubleshooting

Diagnosing Problems

Overview of troubleshooting steps, LED indicators, and performance statistics.

Switch Connections Issues

Resetting to Factory Defaults

Procedure to reset the switch to its original factory settings.

Configuring the Switch with the CLI Setup Program

Accessing the CLI

Explains how to access the switch's command-line interface.

RJ-45 Console Port Configuration

USB Console Port Configuration

Installing USB Device Drivers

Initial Configuration Setup

Step-by-step guide for performing the initial switch setup.