To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst IE-9320-26S2C-A and is the answer not in the manual?
Describes the arrangement of ports and LEDs on the front panel of the Cisco Catalyst IE9300 Rugged Series Switch.
Describes the hot-swappable, redundant power supplies for the Cisco Catalyst IE9300 Rugged Series Switch.
Guides users to read warnings, verify package contents, gather tools, and check switch operations before installation.
Lists crucial safety warnings applicable to all switch models during installation.
Provides steps for rack-mounting the switch, including attaching brackets for different rack sizes.
Details how to mount and connect multiple Cisco Catalyst IE9300 Rugged Series Switches in a rack.
Provides instructions for mounting the switch onto a wall, including bracket attachment and clearance.
Presents procedures for installing and removing fiber-optic and 1000BASE-T SFP transceiver modules.
Explains how to connect devices to the switch's Ethernet ports, covering cable types and autonegotiation.
Details the procedure for installing a power-supply module into the PSU1 or PSU2 slot of the switch.
Guides users through the steps to perform Express Setup for initial IP information entry.
Explains how to access the switch's CLI using either the RJ-45 or USB console port.
Guides users on gathering necessary IP settings and passwords before starting the setup program.
Provides steps to complete the initial setup program and create an initial configuration for the switch.
Explains how switch LEDs and statistics from Web UI/CLI help in diagnosing issues.
Explains reasons and procedures for resetting the switch to its factory default settings.
Discusses password recovery features and the process for clearing configuration for lost passwords.
Details warnings and precautions for installing the switch in hazardous environments.
Contains physical specifications like weight and dimensions, and environmental ranges for operation and storage.
General