CHAPTER 1
Cisco IE9300 Rugged Series Overview
• About the Cisco Catalyst IE9300 Rugged Series Switch, on page 1
• Switch Models, on page 1
• Front Panel, on page 3
• Display Mode Button, on page 4
• Express Setup Button, on page 4
• System LED, on page 5
• Power Supplies, on page 5
• Gigabit Ethernet Ports, on page 7
• Alarms, on page 8
• Console Ports, on page 9
• SD Card Connector, on page 10
• USB Host Port, on page 11
• Stacking Interface, on page 11
About the Cisco Catalyst IE9300 Rugged Series Switch
The Cisco Catalyst IE9300 Rugged Series Switch provides rugged and secure switching infrastructure for
harsh environments. It is suitable for industrial Ethernet applications, including manufacturing, utility
substations, intelligent transportation systems (ITSs), rail transportation, and other similar deployments.
The switch fulfills the need for a high-density SFP, rack-, or wall-mount switch that can function as a
software-defined (SD)-Access fabric edge. It provides end-to-end architectural uniformity in the Cisco Digital
Network Architecture (DNA) for Internet of Things (IoT) for connected communities and extended enterprises.
In industrial environments, the switch can be connected to any Ethernet-enabled industrial communication
devices. These devices include programmable logic controllers (PLCs), human-machine interfaces (HMIs),
drives, sensors, and input and output (I/O) devices.
Switch Models
The Cisco Catalyst IE9300 Rugged Series Switch is available in two hardware models, each with two different
software options.
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
1
To Next Page
Loading...
