Need help?Do you have a question about the Cisco IE 1000 and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Mounting | DIN-rail or wall mounting |
| Dimensions | 90 x 135 x 55 mm (3.54 x 5.31 x 2.17 in) |
| DRAM | 256 MB |
| Flash Memory | 64 MB |
| Model | IE-1000 |
| Ports | 8 or 16 10/100 Mbps ports |
| Uplink Ports | 2 Gigabit Ethernet uplink ports |
| Operating Temperature | -40°C to 70°C |
| Power Input | Dual DC power input |
| Management | Web-based, CLI, SNMP |
| Total Ports | Varies by model (5, 8, or 16 ports) |
| Power Supply | Internal |
| Weight | 1.1 lb |
Details the different Cisco IE 1000 switch models and their port configurations.
Explains the purpose and meaning of the switch's LEDs for status monitoring.
Details environmental and enclosure requirements for safe installation.
Details the process and requirements for connecting power to the switch.
Details the steps for grounding the switch using the ground screw.
Explains how to connect the power converter to a DC power source.
Provides detailed instructions for wiring the switch to a DC power source.
Provides instructions for mounting the switch on a DIN rail.
Details the procedure for removing the switch from a DIN rail.
Instructions for grounding and connecting DC power for alarm circuits.
Explains how to wire external alarm devices to the switch.
Guides on connecting devices to the switch's 10/100 Ethernet ports.
Instructions for installing and removing SFP modules.
Procedure for inserting SFP modules into the switch's SFP slots.
Procedure for removing SFP modules from the switch's SFP slots.
Instructions for connecting fiber-optic cables to SFP modules.
Step-by-step guide to initiate and complete the Express Setup process.
Provides troubleshooting steps for common issues encountered during setup.
Guides on using switch LEDs and statistics for problem diagnosis.
Explains how to interpret switch LEDs for troubleshooting.
Troubleshooting common switch performance issues like speed and duplex mismatches.
Steps to reset the switch to its factory default settings.
Lists safety warnings for installing equipment in hazardous locations.
Details hazardous location approvals and requirements for North America.
Details operating temperature ranges for the switch under various conditions.
To Next Page
