Cisco IE 2000 User Manual

24
Figure 11 Cisco IE 2000 Switch Rear Panel
Management Options
The switch supports these management options:
 Cisco Network Assistant
Cisco Network Assistant is a PC-based network management GUI application optimized for LANs of small- and
medium-sized businesses. Using the GUI, you can configure and manage switch clusters or standalone switches.
Cisco Network Assistant is available at no cost and can be downloaded from this URL:
http://www.cisco.com/en/US/products/ps5931/tsd_products_support_series_home.html
For information on starting the Cisco Network Assistant application, see the Getting Started with Cisco Network
Assistant guide on Cisco.com.
 Device Manager
You can use Device Manager, which is in the switch memory, to manage individual and standalone switches. This
web interface offers quick configuration and monitoring. You can access Device Manager from anywhere in your
network through a web browser. For more information, see the getting started guide and the Device Manager online
help.
 Cisco IOS CLI
The switch CLI is based on Cisco IOS software and is enhanced to support desktop-switching features. You can fully
configure and monitor the switch. You can access the CLI either by connecting your management station directly to
the switch management port, or a console port, or by using Telnet from a remote management station. See the
switch command reference on Cisco.com for more information.
1 Latch
331552
1

Cisco IE 2000 Specifications

General

Brand	Cisco
Model	IE 2000
Category	Switch
Language	English