Cisco 32369 - Page 37

netbios-node-type
Cisco IOS DHCP Server 37
netbios-node-type
To configure the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP)
clients, use the netbios-node-type DHCP pool configuration command. Use the no form of this
command to remove the NetBIOS node type.
netbios-node-type type
no netbios-node-type
Syntax Description
Defaults
None
Command Modes
DHCP pool configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
The recommended type is h-node (hybrid).
Examples
The following example specifies the client’s NetBIOS type as hybrid:
netbios node-type h-node
Related Commands
ip dhcp pool
netbios-name-server
type Specifies the NetBIOS node type. Valid types are:
• b-node Broadcast
• p-node Peer-to-peer
• m-node Mixed
• h-node Hybrid (recommended)