Cisco 730 Manual

You can't install firmware updates to your headset through the USB Adapter.
Note
Procedure
Step 1 Plug in your USB Adapter to your preferred device.
Step 2 Turn on your Cisco Headset 730.
Step 3 On your device, select Cisco HS USB Adapter from the Bluetooth device list.
Pair the USB Adapter to Your Headset
You can re-pair your USB Adapter if you have erased your headset Bluetooth pairings or need to replace your
adapter.
Procedure
Step 1 Connect the USB Adapter to your chosen device.
Step 2 Use a pen or a paper clip to press down the Pairing button on the USB Adapter for four seconds. The blue
LED on top of the adapter blinks when it enters pairing mode.
Step 3 On your headset, slide and hold the Power/Bluetooth switch for two seconds. The adapter and your headset
pair automatically. The LED on top of the adapter shows solid blue when it connects.
Table 2: USB Adapter LED Status
Adapter StatusUSB LED
The USB Adapter is connected to the headset.The LED shows solid
blue.
The USB Adapter is in pairing mode.The LED flashes blue.
The USB Adapter can't find a saved headset. Your headset automatically pairs
to the adapter when it turns on and has less than two active Bluetooth connections.
If you have erased all Bluetooth pairings from your headset, put the adapter and
your headset into pairing mode to reconnect them.
The LED flashes for 10
seconds and turns off.
Your Headset
7
Your Headset
Pair the USB Adapter to Your Headset

Cisco 730 Specifications

General

Control type	Buttons
Headset type	Binaural
Product type	Headset
Product color	Platinum
Wearing style	Head-band
LED indicators	Yes
Operating keys	Answer/end call, Mute, Play/pause, Track \u003C, Track >, Volume +, Volume -
Volume control	Button
Control unit type	On-ear control unit
Country of origin	Malaysia
Recommended usage	Calls/Music
Sound pressure level (max)	118 dB
Number of simultaneously connected devices (max)	3
Wireless range	65 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AAC, AVRCP, HFP, HSP, SBC
Connectivity technology	Wired & Wireless
Quantity	1
Cables included	Audio (3.5mm), USB Type-A to USB Type-C
Wireless receiver interface	USB Type-A
Microphone type	Built-in
Microphone frequency	80 - 6800 Hz
Number of microphones	4
Microphone direction type	Unidirectional
Impedance	32 Ω
Driver unit	40 mm
Ear coupling	Supraaural
Headphone frequency	20 - 20000 Hz
Noise canceling type	Active
Battery type	Built-in battery
Talk time (ANC on)	20 h
Battery recharge time	2.5 h
Continuous audio playback time (with ANC)	22 h
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85183000
Package depth	240 mm
Package width	215.4 mm
Package height	57.9 mm
Package weight	580 g

Weight and Dimensions

Weight	216 g