Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 5
Applications
The flexible Cisco 7609 Router is ideal for addressing high-performance applications such as:
●
High-end customer premises equipment (CPE)
●
Leased line
●
IP/Multiprotocol Label Switching (MPLS) provider edge
●
Metro Ethernet access
●
Enterprise WAN aggregation
●
Mobile Radio Access Network (RAN) aggregation
●
Residential subscriber aggregation
Feature Summary
Cisco 7609 Chassis Features
●
21RU (36.75 in. [93.3 cm]) high, up to 2 chassis per 7-foot rack
●
Nine configurable interface slots
●
Route processor, switch fabric, and power supply protection capability: 1 + 1
●
Tiered-speed fan design (standard): 1 + 1
●
Cable management tray options for fiber and coaxial and dense 10/100 cable
configurations
●
Single-side connection management for both interface and power terminations
●
Front-to-back airflow
Cisco 7609 System Features
●
Total throughput: 720 Gbps
●
Up to 400-Mpps distributed forward rate (requires distributed forwarding cards [DFCs])
Cisco 7609 Technical Specifications
●
Nine-slot chassis
●
Network Equipment Building Standards (NEBS) Level 3 compliance
●
Minimum route processor requirement; one Cisco Catalyst 6500 Series Supervisor Engine
2 with Multilayer Switch Feature Card 2 (MFSC-2)
●
Dimensions (H x W x D): 36.75 x 17.2 x 20.7 in. (93.3 x 43.1 x 53.3 cm)
●
Power requirements:
◦
–208 to 240 VAC (recommended)
◦
–48 to –60 VDC (4000 WAC supplies require 30A input circuits)
●
Weight: 121 lb (54.9 kg; chassis only); 270 lb (122.5 kg; full configuration)
●
Mean time between failure (MTBF): 7 years for system configuration
●
Environmental conditions:
◦
Operating temperature: 32 to 104°F (0 to 40°C)
◦
Storage temperature: –4 to 149°F (–20 to 65°C)
◦
Relative humidity, operating: 10 to 85%, noncondensing
To Next Page
