Cisco 7609 Installing

CHAPTER
3-1
Cisco 7609 Internet Router Installation Guide
OL-5079-04
3
Installing the Cisco 7609 Internet
Router
Note This document describes the Cisco 7609 Internet Router (OSR-7609) and not
the Cisco 7609 Internet Router (CISCO7609).
This chapter describes how to install a Cisco 7609 Internet Router (OSR-7609)
in a rack. For first-time installations, perform the procedures in the following
sections in the order listed:
• Unpacking the Cisco 7609 Internet Router, page 3-2
• Installing the Rack-Mount Kit, page 3-3
• Installing the Cisco 7609 Chassis in the Rack, page 3-8
• Installing the Stabilizer Kit, page 3-10
Note If you are installing a free-standing (not rack-mounted) Cisco
7609 Internet Router, you must install the stabilizer kit, which is
included in the accessories box.
• System Ground Connection, page 3-12
• Installing the Power Supplies in the Cisco 7609 Chassis, page 3-14
• Attaching the Interface Cables, page 3-15
• Verifying Cisco 7609 Chassis Installation, page 3-21

Cisco 7609 Specifications

General

Chassis Slots	9
Switch Fabric Capacity	720 Gbps
Power Supply Options	AC or DC
Product Type	Router
Form Factor	Rack-mountable
Supported Line Cards	Various Cisco 7600 Series line cards
Operating System	Cisco IOS
Management	CLI, SNMP
Forwarding Performance	400 Mpps
Maximum Power Consumption	4000 Watts
Redundancy	Yes
Interfaces/Ports	Various, depending on line cards installed