Cisco 800 Series Quick Reference Guide

Series Features Overview
Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
85
Analog Voice Interface Cards
Product Description
Supported Platforms
and Minimum Cisco
IOS Versions Comments
VIC-2FXO
2-port FXO voice
interface card
The two-port FXO voice/fax
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key systems, and to
provide off-premise
connections. This voice
interface card works with
existing phone and fax
equipment to provide
voice and fax services over
IP, and is compatible with
H.323 standard for audio-
and videoconferencing.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.0(5)T
3640 – 11.3(1)T
3620 – 11.3(1)T
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(2)XA
2610 Series – 11.3(2)XA
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(4)T
1721 – Not Available
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
VIC-2FXO-EU
2-port FXO voice
interface card for Europe
The two-port FXO voice/fax
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system, and to
provide off-premise
connections for Europe
only. This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H.323
standard for audio- and
videoconferencing.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.0(5)T
3640 – 11.3(6)T
3620 – 11.3(6)T
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(6)T
2610 Series – 11.3(6)T
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(4)T
1721 – Not Available
When used in a Cisco 2600
or 3600 Series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
VIC-2FXO-M1
2-port FXO voice interface
card with battery reversal
and caller ID support
The two-port FXO voice/fax
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system, and to
provide off-premise
connections. This voice
interface card supports all
features of VIC-2FXO and
in addition battery
reversal, power denial and
caller ID.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(2)XJ
(Fifth release of 12.2T)
1721 – Not Available
When used in a Cisco 2600
or 3600 Series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
AccessRouter_10.21.02 10/24/02 3:31 PM Page 85

Cisco 800 Series Specifications

General

Model	Cisco 800 Series
Category	Network Router
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Processor	Varies by model
Memory	Varies by model
Operating System	Cisco IOS
WAN Ports	Varies by model
LAN Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Fast Ethernet or Gigabit Ethernet